Installing a spare wheel on a Tesla Model 3

Installing a spare wheel on a Tesla Model 3 requires specific steps and considerations. Please note that the Model 3 does not come equipped with a spare tire or designated storage space for one. However, you can follow these general instructions to install a spare wheel in case of emergencies:

  1. Obtain a compatible spare wheel: Purchase a spare wheel that matches the specifications of the Tesla Model 3, including the correct size, bolt pattern, and load rating. It is advisable to consult with a Tesla service center or a reputable tire shop to ensure you get the appropriate spare wheel.

  2. Gather necessary tools: Prepare the following tools and materials before starting the installation process:

    • Spare wheel
    • Jack (preferably a hydraulic jack or one specifically designed for the Model 3)
    • Lug wrench or a torque wrench
    • Wheel chocks
    • Gloves
    • Safety vest or reflective warning triangle (for visibility during installation)
    • Owner's manual (for specific guidance on jack points and procedures)

  3. Ensure safety: Park your Tesla Model 3 on a level surface and engage the parking brake. Place wheel chocks behind the wheels to prevent any accidental movement.

  4. Locate and prepare the jack points: Refer to the Tesla Model 3 owner's manual to identify the proper jack points on the vehicle. These points are designed to safely lift the car without causing damage. Clear any debris or dirt from the jack points to ensure a secure connection with the jack.

  5. Lift the vehicle: Use the hydraulic jack or the designated jack suitable for the Model 3 to lift the vehicle. Follow the instructions provided with the jack and ensure it is positioned correctly on the jack points. Slowly raise the car until the flat tire is off the ground.

  6. Remove the flat tire: Using the lug wrench or torque wrench, loosen and remove the lug nuts securing the flat tire. Carefully take off the flat tire and set it aside.

  7. Install the spare wheel: Place the spare wheel onto the wheel hub, aligning it with the lug bolt holes. Screw on the lug nuts by hand until they are snug.

  8. Tighten the lug nuts: Gradually tighten the lug nuts in a star or crisscross pattern using the lug wrench or torque wrench. Follow the recommended torque specifications provided in the owner's manual to ensure proper tightening.

  9. Lower the vehicle: Use the jack to slowly lower the Tesla Model 3 until the spare wheel touches the ground. Remove the jack carefully and ensure the spare wheel is securely in place.

  10. Double-check lug nut tightness: After lowering the vehicle completely, double-check the tightness of the lug nuts. Use the torque wrench to verify that all lug nuts are tightened to the recommended specifications.

Remember, a spare wheel is a temporary solution, and it is important to have the flat tire repaired or replaced as soon as possible. Additionally, consult your Tesla Model 3 owner's manual for any specific instructions or precautions related to your vehicle's tire-changing process.

Back to News